An access control door system does one simple job. It decides who can open a door, and when, without anyone needing a key. Behind that simple job sit a few parts that all have to work together, and choosing the wrong one for your door is the most common reason a system ends up unreliable or, worse, unsafe.
We have been fitting door access systems for over 20 years. This guide walks through how they work, the choices you will face, and the questions worth asking before anyone drills a hole in your door frame.
The parts of a door access system
Every access controlled door has the same basic building blocks, whatever brand is fitted.
The reader or keypad
This sits on the outside of the door and reads whatever the user presents. That might be a proximity fob, a card, a PIN code or a smartphone. Most modern readers handle several formats, which is handy if you already have staff cards from another system.
The controller
The controller is the brain. It checks whether the fob or phone is allowed through that door at that time, then tells the lock to release. On a networked system such as Paxton Net2 or Paxton10, each controller talks back to central software so you can manage every door from one place.
The lock
This part physically holds the door shut. The three you will come across most are magnetic locks, electric strikes and motorised or wireless locks built into the handle. More on choosing between them below.
The exit device
People need to get out as well as in. That is usually a request to exit button on the inside, a handle that releases the lock mechanically, or a motion sensor on busy doors.
The power supply
Locks and controllers need power, normally from a dedicated supply with battery backup. How the lock behaves when that power fails is one of the most important decisions in the whole design.
Choosing the right lock for the door
Magnetic locks are strong, simple and very reliable. They hold the door with an electromagnet, so they release the moment power is cut. That makes them a natural fit for fire escape routes, but it also means they need a constant power supply and a proper emergency release.
Electric strikes replace the keep in the door frame and work with the existing lock or latch. They can be set to fail safe or fail secure, and they are often the neatest option on timber doors where you want to keep the door furniture you already have.
Wireless handles such as PaxLock Pro put the reader and lock into the door handle itself and run on batteries. Paxton certifies PaxLock Pro for use on FD30 and FD60 fire doors, and it works with Net2, Paxton10 or on its own. On internal offices, meeting rooms and stores, where running cables through a finished building would be messy, they save a lot of disruption.
Fail safe or fail secure?
Fail safe means the door unlocks when power is lost. A fail secure lock stays locked. Neither is better in general, but the wrong choice on the wrong door is a serious problem.
Doors on an escape route must fail safe, or have a mechanical way out that does not rely on power. Paxton’s own installation guidance is clear that a fail secure lock is not permitted on a fire escape door, because power cannot be guaranteed in an emergency. A store room or comms cupboard with no escape function can fail secure, so it stays locked if someone cuts the power.
Fire exits and break glass units
Where a fire escape door is held by an electric lock, there must be a reliable way to open it if the electronics fail. Paxton’s guidance says this is usually a break glass switch on the lock’s power supply, and that it should be green or white. Red must not be used, as it can be confused with a fire alarm call point. The ordinary exit button does not count as an emergency release.
Many sites also link door locks to the fire alarm so they release automatically when the alarm sounds. Once a lock is connected to the fire alarm in this way, BS 7273 Part 4 sets out how that release should be designed and installed. Some fire officers ask for more, such as break glass units that cut both sides of the power supply. A good installer will design around the standard and your fire risk assessment, not just the brochure.
Fobs, cards, codes or phones?
PIN codes are cheap and need nothing to carry, but codes get shared and rarely changed. Proximity fobs and cards are the workhorse of most systems. They are quick to use, easy to cancel and tied to a named person. Phones are the newest option. Paxton10 supports free smart credentials through the Paxton Key app, and Paxton’s Solo system, launched in 2026, is built entirely around phone access.
For most businesses a mix works best, and our guide to the best access control systems for small businesses goes into the options in more detail. Staff use fobs or phones, while a keypad code or visitor fob covers deliveries and contractors.
Adding door entry and intercoms
Access control handles people who are allowed in. Door entry handles everyone else. A video intercom at the main entrance lets reception see and speak to visitors before releasing the door, and systems such as Paxton Entry can work on their own or alongside Net2 and Paxton10. For flats and shared buildings, residents can often answer the door from their phone.
Thinking about accessibility
Under the Equality Act 2010, the way people get in should not put disabled users at a disadvantage. Keypads can be difficult for people with visual impairments or limited hand movement, and audio only intercoms are no use to someone who cannot hear them. Proximity readers, phone credentials and video intercoms with clear visual feedback are generally easier for everyone, and readers should sit within comfortable reach for wheelchair users. On heavy doors, an automatic or power assisted opener may also be needed.
What to ask your installer
Before you agree a quote, ask which doors are on an escape route and how each one will release in an emergency. Find out what happens when the power fails, and how long the battery backup lasts. Check who will manage users day to day and what training is included. And ask what servicing they recommend, because locks, closers and batteries all wear, and a door that sticks is a door people start propping open.
We are approved Paxton installers based in Leicester, covering the Midlands and Hertfordshire. Call 0116 236 6044 or email info@accesscontrolsolutions.co.uk and we will come out, look at your doors and give you straight advice.
Frequently asked questions
How does an access control door system work?
A reader on the outside of the door checks the user’s fob, card, code or phone. Then a controller decides whether that person is allowed through at that time and, if so, releases the electric lock for a few seconds. On a networked system every door reports back to central software.
Can access control be fitted to a fire door?
Yes, as long as the lock and any holes in the door suit its fire rating. Some products, such as PaxLock Pro, are certified for FD30 and FD60 fire doors. If the door is also a fire escape, it must be able to open in an emergency, usually with a fail safe lock and a green or white break glass unit.
What is the difference between fail safe and fail secure?
A fail safe lock unlocks when it loses power, while a fail secure lock stays locked. Escape doors need a fail safe arrangement, while store rooms and cupboards with no escape function are often set to fail secure.
Do I need to run cables to every door?
Not always. Wireless handles such as PaxLock Pro run on batteries and talk to the system wirelessly, which suits many internal doors. External doors and anything with a magnetic lock usually still need cabling for power.
Can I control doors from my phone?
Yes. Many systems let administrators open doors, add or remove users and check activity from an app, and some let staff use their phone instead of a fob.
How often should a door access system be serviced?
We recommend at least once a year. A service checks locks, closers, emergency releases, batteries and software, and it catches problems before a door fails in the middle of a working day.
Posted in Access Control, Latest News
